http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 1 o this data sheet is applied for chip common mode choke coil used for automotive electronics equipment for your design. 2011.1.13 noise suppression products/emi suppression filters > for automotive > common mode choke coil for automotive (in mm) 3.2 0.2 2.6 0.2 4.5 0.2 (0.8) (0.30) (1) (2) (4) (3) (0.6): 100 h (0.7): 11, 21, 51 h (in mm) 3.2 0.2 2.7 0.2 4.5 0.2 (0.8) (0.30) (1) (2) (4) (3) (0.6) 1 10 100 frequency (mhz) 1 10 100 1000 10000 100000 impedance ( ? ) differential mode common mode dlw43sh110xk2 dlw43sh220xk2 dlw43sh510xk2 dlw43sh101xk2 dlw43sh110xk2 dlw43sh220xk2 dlw43sh510xk2 dlw43sh10xk2 0.1 1 10 100 1000 10000 0.1 1 10 100 frequency (mhz) impedance ( ? ) common mode differential mode dlw43sh101xp2 dlw43sh101xp2 (1) (2) (4) (3) no polarity. for automotive common mode choke coil for automotive dlw43s series (1812 size) dimensions dlw43s_xk series dimensions dlw43s_xp series impedance-frequency characteristics (main items) dlw43s_xk series impedance-frequency characteristics (main items) dlw43s_xp series equivalent circuit packaging code packaging minimum quantity l 180mm embossed tape 500 k 330mm embossed tape 2500 b bulk(bag) 100 continued on the following page.
continued from the preceding page. http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 2 o this data sheet is applied for chip common mode choke coil used for automotive electronics equipment for your design. 2011.1.13 noise suppression products/emi suppression filters > for automotive > common mode choke coil for automotive rated value ( p : packaging code) part number common mode inductance rated current rated voltage insulation resistance (min.) withstand voltage dc resistance operating temperature range dlw43sh110xk2 p 11 h-30%/+50% (at 0.1mhz) 360ma 50vdc 10m ohm 125vdc 0.5ohm max -40 to +125 c dlw43sh220xk2 p 22 h-30%/+50% (at 0.1mhz) 310ma 50vdc 10m ohm 125vdc 0.6ohm max -40 to +125 c dlw43sh510xk2 p 51 h-30%/+50% (at 1mhz) 230ma 50vdc 10m ohm 125vdc 1.0ohm max -40 to +125 c dlw43sh101xk2 p 100 h-30%/+50% (at 1mhz) 200ma 50vdc 10m ohm 125vdc 2.0ohm max -40 to +125 c dlw43sh101xp2 p 100 h-30%/+80% (at 0.1mhz) 170ma 50vdc 10m ohm 125vdc 2.0ohm max -40 to +125 c number of circuit: 1 ! caution (rating) 1. do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. 2. be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure our product. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the tin melting point is used. please confirm the solderability of tin plating termination chip before use. ! caution/notice
|
